-- *****************************************************************************
-- Juniper-ATM-1483-Profile-MIB
--
-- Juniper Networks Enterprise MIB
-- ATM 1483 Profile MIB
--
-- Copyright (c) 2004 Juniper Networks, Inc. All Rights Reserved.
-- Copyright (c) 2003, 2004 Juniper Networks, Inc. All Rights Reserved.
-- *****************************************************************************Juniper-ATM-1483-Profile-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Unsigned32,Gauge32,Integer32FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
DisplayStringFROM SNMPv2-TC
juniMibs
FROM Juniper-MIBs
JuniEnable, JuniSetMap
FROM Juniper-TC
JuniProfileIfEncaps
FROM Juniper-PROFILE-MIB;juniAtm1483ProfileMIB MODULE-IDENTITYLAST-UPDATED"200511181407Z"-- 18-Nov-05 2:07 PM ESTORGANIZATION"Juniper Networks, Inc."CONTACT-INFO" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
Email: mib@Juniper.net"DESCRIPTION"The ATM Profile MIB for the Juniper Networks, Inc. enterprise."-- Revision HistoryREVISION"200511181407Z"-- 18-Nov-05 2:07 PM EST - JUNOSe 7.3DESCRIPTION"Added ATM VC class support."REVISION"200411022107Z"-- 02-Nov-04 04:07 PM EST - JUNOSe 7.0DESCRIPTION"Added Encapsulation Type Lockout objects."REVISION"200411022107Z"-- 02-Nov-04 04:07 PM EST - JUNOSe 5.3
DESCRIPTION"Added ifALias support to profile entries.
Added advisoryRxSpeed to profile entries."REVISION"200411022107Z"-- 02-Nov-04 04:07 PM EST - JUNOSe 5.1DESCRIPTION"Initial version of this MIB module.
Added OAM support to profile entries."::={ juniMibs 58}-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++juniAtm1483ProfileObjects OBJECTIDENTIFIER::={ juniAtm1483ProfileMIB 1}juniAtm1483Profile OBJECTIDENTIFIER::={ juniAtm1483ProfileObjects 1}--
-- This MIB defines configuration profile structure for ATM interfaces.
-- The creation/deletion of profiles and mapping of profile names to profile
-- indices is coordinated in the Juniper-PROFILE-MIB.
--
--
-- The ATM 1483 Profile Table
--juniAtm1483ProfileTable OBJECT-TYPESYNTAXSEQUENCEOF JuniAtm1483ProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains profiles for configuring bulk ATM circuits.
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB."::={ juniAtm1483Profile 1}juniAtm1483ProfileEntry OBJECT-TYPESYNTAX JuniAtm1483ProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A profile describing VCC configuration of an ATM subinterface."INDEX{ juniAtm1483ProfileId }::={ juniAtm1483ProfileTable 1}
JuniAtm1483ProfileEntry ::=SEQUENCE{
juniAtm1483ProfileId Unsigned32,
juniAtm1483ProfileSetMap JuniSetMap,
juniAtm1483ProfileVccType INTEGER,
juniAtm1483ProfileVccServiceCategory INTEGER,
juniAtm1483ProfileVccPcr Gauge32,
juniAtm1483ProfileVccScr Gauge32,
juniAtm1483ProfileVccMbs Gauge32,
juniAtm1483ProfileIfAlias DisplayString,
juniAtm1483ProfileAdvisoryRxSpeed Integer32,
juniAtm1483ProfileVccOamAdminStatus INTEGER,
juniAtm1483ProfileVccOamLoopbackFrequency Unsigned32,
juniAtm1483ProfileVcClassName DisplayString}juniAtm1483ProfileId OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable."::={ juniAtm1483ProfileEntry 1}juniAtm1483ProfileSetMap OBJECT-TYPESYNTAX JuniSetMap
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.
The INDEX object(s) and this object are excluded from representation
(i.e. their bits are never set).
When a SET request does not explicitly configure JuniSetMap, bits in
JuniSetMap are set as a side-effect of configuring other profile
attributes in the same entry.
If, however, a SET request explicitly configures JuniSetMap, the
explicitly configured value overrides 1) any previous bit settings, and
2) any simultaneous 'side-effect' settings that would otherwise occur.
Once set, bits can only be cleared by explicitly configuring
JuniSetMap."::={ juniAtm1483ProfileEntry 2}juniAtm1483ProfileVccType OBJECT-TYPESYNTAXINTEGER{rfc1483VcMux(0),rfc1483Llc(1),autoconfig(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. 'autoconfig' will recognize both VcMux and LLC formats."DEFVAL{ rfc1483VcMux }::={ juniAtm1483ProfileEntry 3}juniAtm1483ProfileVccServiceCategory OBJECT-TYPE
SYNTAXINTEGER{ubr(0),ubrPcr(1),nrtVbr(2),cbr(3),rtVbr(4)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Service category for this circuit:
ubr Unspecified Bit Rate (best effort).
ubrPcr Unspecified Bit Rate with Peak Cell Rate limit.
nrtVbr Non-realtime Variable Bit Rate.
cbr Constant Bit Rate.
rtVbr Realtime Variable Bit Rate."DEFVAL{ ubr }::={ juniAtm1483ProfileEntry 4}juniAtm1483ProfileVccPcr OBJECT-TYPE
SYNTAXGauge32UNITS"kilo-bits per second"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Peak Cell Rate, in kilo-bits per second (kbps), of this circuit.
This parameter is only required when
juniAtm1483ProfileVccServiceCategory is configured to have one of the
following values:
ubrPcr
nrtVbr
cbr
rtVbr "DEFVAL{0}::={ juniAtm1483ProfileEntry 5}juniAtm1483ProfileVccScr OBJECT-TYPESYNTAXGauge32UNITS"kilo-bits per second"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Sustained Cell Rate, in kilo-bits per second (kbps), of this circuit.
This parameter is only required when
juniAtm1483ProfileVccServiceCategory is configured to have one of the
following values:
nrtVbr
rtVbr "DEFVAL{0}::={ juniAtm1483ProfileEntry 6}juniAtm1483ProfileVccMbs OBJECT-TYPESYNTAXGauge32UNITS"cells"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Maximum Burst Size, in cells, of this circuit.
This parameter is only required when
juniAtm1483ProfileVccServiceCategory is configured to have one of the
following values:
nrtVbr
rtVbr "DEFVAL{0}::={ juniAtm1483ProfileEntry 7}juniAtm1483ProfileIfAlias OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is an 'alias' name for the interface as specified by a
network manager, and provides a non-volatile 'handle' for the interface.
This object initializes ifAlias for the interface. Note, all
interfaces created through the same profile entry will have identical
values for ifAlias."::={ juniAtm1483ProfileEntry 8}juniAtm1483ProfileAdvisoryRxSpeed OBJECT-TYPESYNTAXInteger32(0..2147483647)UNITS"kilo-bits per second"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Advisory receive speed, in kilobits per second (kbps),
of this subinterface. This object has no impact on
forwarding performance but may be used as a hint for the
underlying circuit receive speed. A value of 0 indicates
that this feature is not enabled."DEFVAL{0}
::={ juniAtm1483ProfileEntry 9}juniAtm1483ProfileVccOamAdminStatus OBJECT-TYPESYNTAXINTEGER{oamAdminStateDisabled(1),oamAdminStateEnabled(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The administrative state of OAM for the interface identified by this
entry."DEFVAL{ oamAdminStateDisabled }::={ juniAtm1483ProfileEntry 10}juniAtm1483ProfileVccOamLoopbackFrequency OBJECT-TYPESYNTAXUnsigned32(0..600)
UNITS"seconds"MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The OAM loopback frequency for the interface identified by this entry."DEFVAL{10}::={ juniAtm1483ProfileEntry 11}juniAtm1483ProfileVcClassName OBJECT-TYPESYNTAXDisplayString(SIZE(0..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The name of the ATM VC class assigned to this profile."::={ juniAtm1483ProfileEntry 12}--
-- ATM 1483 Auto-configuration Table
--juniAtm1483ProfileAutoConfTable OBJECT-TYPE
SYNTAXSEQUENCEOF JuniAtm1483ProfileAutoConfEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Configures recognition of incoming data encapsulation types that
trigger autoconfiguration on an interface."::={ juniAtm1483Profile 2}juniAtm1483ProfileAutoConfEntry OBJECT-TYPESYNTAX JuniAtm1483ProfileAutoConfEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Configures recognition of an incoming data encapsulation type that
triggers autoconfiguration on an interface."INDEX{ juniAtm1483ProfileAutoConfId,
juniAtm1483ProfileAutoConfEncaps }::={ juniAtm1483ProfileAutoConfTable 1}
JuniAtm1483ProfileAutoConfEntry ::=SEQUENCE{
juniAtm1483ProfileAutoConfId Unsigned32,
juniAtm1483ProfileAutoConfEncaps JuniProfileIfEncaps,
juniAtm1483ProfileAutoConfEnable JuniEnable,
juniAtm1483ProfileAutoConfLockoutMin Integer32,
juniAtm1483ProfileAutoConfLockoutMax Integer32}juniAtm1483ProfileAutoConfId OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable."::={ juniAtm1483ProfileAutoConfEntry 1}juniAtm1483ProfileAutoConfEncaps OBJECT-TYPESYNTAX JuniProfileIfEncaps
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"The encapsulating protocol type to which the autconfiguration
information in this entry applies.
The valid values are:
ip(0),
ppp(1),
pppoe(17),
bridgedEthernet(19) "::={ juniAtm1483ProfileAutoConfEntry 2}juniAtm1483ProfileAutoConfEnable OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"When enabled, permits autoconfiguration of the specified interface when
the specified encapsulation is recognized in an incoming data frame.
This parameter can only be set when juniAtm1483ProfileAutoConfEncaps is
configured to one of the following values:
ip(0),
ppp(1)
pppoe(17),
bridgedEthernet(19) "::={ juniAtm1483ProfileAutoConfEntry 3}juniAtm1483ProfileAutoConfLockoutMin OBJECT-TYPESYNTAXInteger32(0..86400)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The lower bound, in seconds, of the time range used to specify
the duration of the lockout of the encapsulation type from
recognition for the specified interface. This only takes effect
if juniAtm1483ProfileAutoConfEnable is set to enable for the
encapsulation type for this interface.
The ability to lockout the specified encapsulation type from
recognition in the event of an error in creating an interface of
the encapsulation type is enabled by default. The initial lockout
duration is this object's value and increases exponentially for
each failure that occurs for the specified encapsulation type
for the specified interface within the greater of 15 minutes and
juniAtm1483ProfileAutoConfLockoutMax. The lockout duration for the
specified encapsulation type will not exceed
juniAtm1483ProfileAutoConfLockoutMax. If the time between creation
errors for the specified encapsulation type for the specified
interface is greater than the greater of 15 minutes and
juniAtm1483ProfileAutoConfLockoutMax, then the lockout duration
reverts to this object's value.
To disable the ability to lockout the specified encapsulation type
from recognition in the event of an error in creating an interface
of the encapsulation type for the specified interface, the value of
this object and juniAtm1483ProfileAutoConfLockoutMax must be set to 0.
It is not recommended that this lockout feature be disabled except
for debugging purposes."DEFVAL{1}::={ juniAtm1483ProfileAutoConfEntry 4}juniAtm1483ProfileAutoConfLockoutMax OBJECT-TYPESYNTAXInteger32(0..86400)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The upper bound, in seconds, of the time range used to specify
the duration of the lockout of the encapsulation type from
recognition for the specified interface. This value must equal
or exceed the value for juniAtm1483ProfileAutoConfLockoutMin. This
only takes effect if juniAtm1483ProfileAutoConfEnable is set to
enable for the encapsulation type for this interface.
The ability to lockout the specified encapsulation type from
recognition in the event of an error in creating an interface of
the encapsulation type is enabled by default. The initial lockout
duration is juniAtm1483ProfileAutoConfLockoutMin and increases
exponentially for each failure that occurs for the specified
encapsulation type for the specified interface within the greater
of 15 minutes and this object's value. The lockout duration for
the specified encapsulation type will not exceed this object's
value. If the time between creation errors for the specified
encapsulation type for the specified interface is greater than
the greater of 15 minutes and this object's value, then the
lockout duration reverts to juniAtm1483ProfileAutoConfLockoutMin.
To disable the ability to lockout the specified encapsulation type
from recognition in the event of an error in creating an interface
of the encapsulation type for the specified interface, the value of
this object and juniAtm1483ProfileAutoConfLockoutMin must be set to 0.
It is not recommended that this lockout feature be disabled except
for debugging purposes."DEFVAL{300}::={ juniAtm1483ProfileAutoConfEntry 5}
--
-- ATM 1483 Profile Nested Profile Table
--juniAtm1483ProfileNestedProfileTable OBJECT-TYPESYNTAXSEQUENCEOF JuniAtm1483ProfileNestedProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Specifies nested profiles for incoming data encapsulation types.
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB."::={ juniAtm1483Profile 3}juniAtm1483ProfileNestedProfileEntry OBJECT-TYPESYNTAX JuniAtm1483ProfileNestedProfileEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Specifies nested profile for incoming data encapsulation type."INDEX{ juniAtm1483ProfileNestedProfileId,
juniAtm1483ProfileNestedProfileEncaps }
::={ juniAtm1483ProfileNestedProfileTable 1}
JuniAtm1483ProfileNestedProfileEntry ::=SEQUENCE{
juniAtm1483ProfileNestedProfileId Unsigned32,
juniAtm1483ProfileNestedProfileEncaps JuniProfileIfEncaps,
juniAtm1483ProfileNestedProfileUpperIfProfileName DisplayString}juniAtm1483ProfileNestedProfileId OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable."::={ juniAtm1483ProfileNestedProfileEntry 1}juniAtm1483ProfileNestedProfileEncaps OBJECT-TYPESYNTAX JuniProfileIfEncaps
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The encapsulating protocol type to which the nested profile specified
in this entry applies.
The valid values are:
ip(0),
ppp(1),
pppoe(17),
bridgedEthernet(19) "::={ juniAtm1483ProfileNestedProfileEntry 2}juniAtm1483ProfileNestedProfileUpperIfProfileName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The name of profile used for the protocol type specified by
juniAtm1483ProfileNestedProfileEncaps."::={ juniAtm1483ProfileNestedProfileEntry 3}--
-- ATM 1483 Profile Subscriber Table
--juniAtm1483ProfileSubscriberTable OBJECT-TYPESYNTAXSEQUENCEOF JuniAtm1483ProfileSubscriberEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Configures subscriber identity used in circumstances where the remote
subscriber's identity cannot be queried directly (e.g. dynamic IPoA
operation).
Entries in this table are created/deleted as a side-effect of
corresponding operations to the juniProfileNameTable in the
Juniper-PROFILE-MIB."::={ juniAtm1483Profile 4}juniAtm1483ProfileSubscriberEntry OBJECT-TYPESYNTAX JuniAtm1483ProfileSubscriberEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Configures subscriber identity used in circumstances where the remote
subscriber's identity cannot be queried directly (e.g. dynamic IPoA
operation)."INDEX{ juniAtm1483ProfileSubscriberId,
juniAtm1483ProfileSubscriberEncaps }::={ juniAtm1483ProfileSubscriberTable 1}
JuniAtm1483ProfileSubscriberEntry ::=SEQUENCE{
juniAtm1483ProfileSubscriberId Unsigned32,
juniAtm1483ProfileSubscriberEncaps JuniProfileIfEncaps,
juniAtm1483ProfileSubscriberNamePrefix JuniEnable,
juniAtm1483ProfileSubscriberName DisplayString,
juniAtm1483ProfileSubscriberPasswordPrefix JuniEnable,
juniAtm1483ProfileSubscriberPassword DisplayString,
juniAtm1483ProfileSubscriberDomain DisplayString}juniAtm1483ProfileSubscriberId OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable."::={ juniAtm1483ProfileSubscriberEntry 1}
juniAtm1483ProfileSubscriberEncaps OBJECT-TYPESYNTAX JuniProfileIfEncaps
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The encapsulating protocol type to which the subscriber information in
this entry applies.
The valid values are:
ip(0),
bridgedEthernet(19) "::={ juniAtm1483ProfileSubscriberEntry 2}juniAtm1483ProfileSubscriberNamePrefix OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"If enabled, indicates whether the value of juniSubscriberName is a
prefix rather than a full name.
This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is
configured to one of the following values:
ip(0),
bridgedEthernet(19)
For all other values of juniAtm1483ProfileSubscriberEncaps it returns
'disable'."::={ juniAtm1483ProfileSubscriberEntry 3}
juniAtm1483ProfileSubscriberName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"If juniAtm1483ProfileSubscriberNamePrefix has the value 'enabled', the
value of this object serves as the prefix of a full subscriber name.
The full name is constructed by appending local geographic information
(slot, port, etc.) that uniquely distinguishes the subscriber.
This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is
configured to one of the following values:
ip(0),
bridgedEthernet(19)
For all other values of juniAtm1483ProfileSubscriberEncaps it returns an
empty string."::={ juniAtm1483ProfileSubscriberEntry 4}juniAtm1483ProfileSubscriberPasswordPrefix OBJECT-TYPESYNTAX JuniEnable
MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"If enabled, indicates whether the value of
juniAtm1483ProfileSubscriberPassword is a prefix rather than a full
password.
This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is
configured to one of the following values:
ip(0),
bridgedEthernet(19)
For all other values of juniAtm1483ProfileSubscriberEncaps it returns an
empty string."::={ juniAtm1483ProfileSubscriberEntry 5}juniAtm1483ProfileSubscriberPassword OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The subscriber's password.
If juniAtm1483ProfileSubscriberPasswordPrefix has the value 'enabled',
the value of this object serves as the prefix of a full subscriber
password. The full password is constructed by appending local
geographic information (slot, port, etc.) that uniquely distinguishes
the subscriber.
This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is
configured to one of the following values:
ip(0),
bridgedEthernet(19)
For all other values of juniAtm1483ProfileSubscriberEncaps it returns an
empty string."::={ juniAtm1483ProfileSubscriberEntry 6}juniAtm1483ProfileSubscriberDomain OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The subscriber's domain.
This parameter is valid only when juniAtm1483ProfileSubscriberEncaps is
configured to one of the following values:
ip(0),
bridgedEthernet(19)
For all other values of juniAtm1483ProfileSubscriberEncaps it returns an
empty string."::={ juniAtm1483ProfileSubscriberEntry 7}-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Notifications
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- No notifications are defined in this MIB.-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++juniAtm1483ProfileConformance OBJECTIDENTIFIER::={ juniAtm1483ProfileMIB 4}juniAtm1483ProfileCompliances OBJECTIDENTIFIER::={ juniAtm1483ProfileConformance 1}juniAtm1483ProfileGroups OBJECTIDENTIFIER::={ juniAtm1483ProfileConformance 2}--
-- compliance statements
--juniAtm1483ProfileCompliance MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities which implement the Juniper
ATM Profile MIB. This statement became obsolete when ifALias support
was added to profile entries."MODULE-- this moduleMANDATORY-GROUPS{
juniAtm1483ProfileGroup }
::={ juniAtm1483ProfileCompliances 1}-- JUNOSe 5.1juniAtm1483ProfileCompliance2 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities which implement the Juniper
ATM Profile MIB. This statement became obsolete when lockout objects
were added to juniAtm1483ProfileAutoConfTable."MODULE-- this moduleMANDATORY-GROUPS{
juniAtm1483ProfileGroup2 }::={ juniAtm1483ProfileCompliances 2}-- JUNOSe 5.3juniAtm1483ProfileCompliance3 MODULE-COMPLIANCESTATUSobsoleteDESCRIPTION"Obsolete compliance statement for entities which implement the Juniper ATM
Profile MIB."MODULE-- this moduleMANDATORY-GROUPS{
juniAtm1483ProfileGroup3 }::={ juniAtm1483ProfileCompliances 3}-- JUNOSe 7.0juniAtm1483ProfileCompliance4 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities which implement the Juniper ATM
Profile MIB."MODULE-- this moduleMANDATORY-GROUPS{
juniAtm1483ProfileGroup6 }::={ juniAtm1483ProfileCompliances 4}-- JUNOSe 7.3--
-- units of conformance
--juniAtm1483ProfileGroup OBJECT-GROUPOBJECTS{
juniAtm1483ProfileSetMap,
juniAtm1483ProfileVccType,
juniAtm1483ProfileVccServiceCategory,
juniAtm1483ProfileVccPcr,
juniAtm1483ProfileVccScr,
juniAtm1483ProfileVccMbs,
juniAtm1483ProfileAutoConfEnable,
juniAtm1483ProfileNestedProfileUpperIfProfileName,
juniAtm1483ProfileSubscriberNamePrefix,
juniAtm1483ProfileSubscriberName,
juniAtm1483ProfileSubscriberPasswordPrefix,
juniAtm1483ProfileSubscriberPassword,
juniAtm1483ProfileSubscriberDomain }STATUSobsoleteDESCRIPTION"Obsolete collection of objects providing management of profile
functionality for ATM subinterfaces in a Juniper product. This group
became obsolete when ifALias support was added to profile entries."::={ juniAtm1483ProfileGroups 1}juniAtm1483ProfileGroup2 OBJECT-GROUPOBJECTS{
juniAtm1483ProfileSetMap,
juniAtm1483ProfileVccType,
juniAtm1483ProfileVccServiceCategory,
juniAtm1483ProfileVccPcr,
juniAtm1483ProfileVccScr,
juniAtm1483ProfileVccMbs,
juniAtm1483ProfileIfAlias,
juniAtm1483ProfileAdvisoryRxSpeed,
juniAtm1483ProfileAutoConfEnable,
juniAtm1483ProfileNestedProfileUpperIfProfileName,
juniAtm1483ProfileSubscriberNamePrefix,
juniAtm1483ProfileSubscriberName,
juniAtm1483ProfileSubscriberPasswordPrefix,
juniAtm1483ProfileSubscriberPassword,
juniAtm1483ProfileSubscriberDomain }STATUSobsoleteDESCRIPTION"Obolete collection of objects providing management of profile
functionalityfor ATM subinterfaces in a Juniper product. This group
became obsolete when OAM support was added to profile entries."::={ juniAtm1483ProfileGroups 2}juniAtm1483ProfileGroup3 OBJECT-GROUPOBJECTS{
juniAtm1483ProfileSetMap,
juniAtm1483ProfileVccType,
juniAtm1483ProfileVccServiceCategory,
juniAtm1483ProfileVccPcr,
juniAtm1483ProfileVccScr,
juniAtm1483ProfileVccMbs,
juniAtm1483ProfileVccOamAdminStatus,
juniAtm1483ProfileVccOamLoopbackFrequency,
juniAtm1483ProfileAutoConfEnable,
juniAtm1483ProfileNestedProfileUpperIfProfileName,
juniAtm1483ProfileSubscriberNamePrefix,
juniAtm1483ProfileSubscriberName,
juniAtm1483ProfileSubscriberPasswordPrefix,
juniAtm1483ProfileSubscriberPassword,
juniAtm1483ProfileSubscriberDomain }STATUSobsoleteDESCRIPTION"Obsolete collection of objects providing management of profile
functionality for ATM subinterfaces in a Juniper product. This group
became obsolete when ifALias support was added to profile entries."::={ juniAtm1483ProfileGroups 3}juniAtm1483ProfileGroup4 OBJECT-GROUPOBJECTS{
juniAtm1483ProfileSetMap,
juniAtm1483ProfileVccType,
juniAtm1483ProfileVccServiceCategory,
juniAtm1483ProfileVccPcr,
juniAtm1483ProfileVccScr,
juniAtm1483ProfileVccMbs,
juniAtm1483ProfileIfAlias,
juniAtm1483ProfileAdvisoryRxSpeed,
juniAtm1483ProfileVccOamAdminStatus,
juniAtm1483ProfileVccOamLoopbackFrequency,
juniAtm1483ProfileAutoConfEnable,
juniAtm1483ProfileNestedProfileUpperIfProfileName,
juniAtm1483ProfileSubscriberNamePrefix,
juniAtm1483ProfileSubscriberName,
juniAtm1483ProfileSubscriberPasswordPrefix,
juniAtm1483ProfileSubscriberPassword,
juniAtm1483ProfileSubscriberDomain }STATUSobsoleteDESCRIPTION"Obsolete collection of objects providing management of profile
functionality for ATM subinterfaces in a Juniper product. This group
became obsolete when Encapsulation Type Lockout objects were added
to profile entries."::={ juniAtm1483ProfileGroups 4}
juniAtm1483ProfileGroup5 OBJECT-GROUPOBJECTS{
juniAtm1483ProfileSetMap,
juniAtm1483ProfileVccType,
juniAtm1483ProfileVccServiceCategory,
juniAtm1483ProfileVccPcr,
juniAtm1483ProfileVccScr,
juniAtm1483ProfileVccMbs,
juniAtm1483ProfileIfAlias,
juniAtm1483ProfileAdvisoryRxSpeed,
juniAtm1483ProfileVccOamAdminStatus,
juniAtm1483ProfileVccOamLoopbackFrequency,
juniAtm1483ProfileAutoConfEnable,
juniAtm1483ProfileAutoConfLockoutMin,
juniAtm1483ProfileAutoConfLockoutMax,
juniAtm1483ProfileNestedProfileUpperIfProfileName,
juniAtm1483ProfileSubscriberNamePrefix,
juniAtm1483ProfileSubscriberName,
juniAtm1483ProfileSubscriberPasswordPrefix,
juniAtm1483ProfileSubscriberPassword,
juniAtm1483ProfileSubscriberDomain }STATUSobsoleteDESCRIPTION
"Obsolete collection of objects providing management of profile functionality
for ATM subinterfaces in a Juniper product."::={ juniAtm1483ProfileGroups 5}juniAtm1483ProfileGroup6 OBJECT-GROUPOBJECTS{
juniAtm1483ProfileSetMap,
juniAtm1483ProfileVccType,
juniAtm1483ProfileVccServiceCategory,
juniAtm1483ProfileVccPcr,
juniAtm1483ProfileVccScr,
juniAtm1483ProfileVccMbs,
juniAtm1483ProfileIfAlias,
juniAtm1483ProfileAdvisoryRxSpeed,
juniAtm1483ProfileVccOamAdminStatus,
juniAtm1483ProfileVccOamLoopbackFrequency,
juniAtm1483ProfileVcClassName,
juniAtm1483ProfileAutoConfEnable,
juniAtm1483ProfileAutoConfLockoutMin,
juniAtm1483ProfileAutoConfLockoutMax,
juniAtm1483ProfileNestedProfileUpperIfProfileName,
juniAtm1483ProfileSubscriberNamePrefix,
juniAtm1483ProfileSubscriberName,
juniAtm1483ProfileSubscriberPasswordPrefix,
juniAtm1483ProfileSubscriberPassword,
juniAtm1483ProfileSubscriberDomain }STATUScurrentDESCRIPTION"A collection of objects providing management of profile functionality
for ATM subinterfaces in a Juniper product."::={ juniAtm1483ProfileGroups 6}END